EN10088-1 X12CrMnNiN18-9-5(material no 1.4373) Stainless steel
EN10088-1 X12CrMnNiN18-9-5(material no 1.4373)(material no 1.4373)Stainless steel is a kind of Austenitic Stainless Steel material.
X12CRMNNIN18-9-5 stainless steel chemical composition:
|
C(％) |
Si(％) |
Mn(％) |
P(％) |
S(％) |
Cr(％) |
Ni(％) |
N(%) |
|
Max 0.015 |
Max 1.00 |
7.50-10.5 |
Max 0.045 |
Max 0.015 |
17.00-19.00 |
4.00-6.00 |
0.05-0.25 |
X12CRMNNIN18-9-5 stainless steel mechanical property:
|
Annealing hardness |
Cold pull hardness |
Preheating temperature |
Quenching temperature |
Holding time |
Hardening medium |
Temper temperature |
After tempering hardness |
|
|
salt-bath furnace |
controlled atmosphere furnace |
|||||||
|
235 |
262 |
788 |
1191 |
1204 |
5～15 |
air cooling |
522 |
60 |
|
Steel plate/Sheet |
σb |
σs |
δ |
180 ° of cold bending test |
|
|
longitudinal |
horizontal |
||||
|
Hot-rolled/Cold rolling:5 - 150 |
520 |
415 |
16～18 |
2a |
3.5a |
X12CRMNNIN18-9-5 stainless steel specification:
Round bar: Diameter : 1mm-2000mm
Square bar: 50mm * 50mm-600mm *600mm
Plate steel/flat bar: Thickness: 0.1mm-800mm Width: 10mm to 1500mm
Tube/pipe: OD: 6-219mm WT: 1-35 mm.
Cold-rolled sheet: Thickness: 2-5mm Width:1000mm Length: 2000mm
Hot-rolled sheet: Thickness:6-80mm Width: 210-610mm
Length: We can supply any length based on the customer's requirement
X12CRMNNIN18-9-5 stainless steel is one of mainly products of BEBON STEEL. We have registered a large number of ex-stock. If you require X12CRMNNIN18-9-5 stainless steel, we can send goods to you immediately. So, if you are interested in X12CRMNNIN18-9-5 stainless steel, please contact BEBON STEEL.
Source:
