Cutting of numerical control technical.
| NC Cutting technical standard | |||||||
| 一：Verticality of the standard in NC Cutting | |||||||
| Thickness of steel plate（mm） | Vertical（mm） | ||||||
| ＜100 100-150 150-200 200-250 250-300 300-400 |
＜3 3-4 4-5 5-6 6-7 7-9 |
||||||
| 二：Cutting angle of deviation （tolerance in cutting ：±mm） | |||||||
| thickness（mm） | |||||||
| ≤25 1.5 |
＞25-50 2 |
＞50-100 2.5 |
＞100-200 3 |
＞200-300 5 |
|||
| 三：The way of Eliminate stress | |||||||
| Mn steel plate ： the machine could cut in the way of ARC. | |||||||
| 四：The flatness will be the same with WGJ GIS709 | |||||||
| GB Standard：Square meters≤7mm Internal control standards：4mm Carbon and Alloy steel plate： It could use the Internal control standards Excellent carbon steel plate：According to GB standard |
|||||||
| 五：Machining parts machining allowance | |||||||
| Thickness(mm) ＜100 ＜200 ＜300 ＞300 |
Unilateral allowance （mm） 5－8 8－10 10－15 ＞20 |
||||||
2. The Cutting Way
A NC flame cutting，Line Cutting , water cutting, and Laser cutting.
B Cutting Thickness : 2mm -400mm.
C Cutting Width ： 25mm -4000mm
Source:
Tags:
