310 stainless steel plate%sheet,310 stainless steel pipe,ASTM 310 stainless steel coil

310 Stainless steel

Stainless steel 310 is an austenitic heat resistant alloy with excellent resistance to oxidation under mildly cyclic conditions through 2000ºF. Its high chromium and nickel contents provide comparable corrosion resistance, superior resistance to oxidation and the retention of a larger fraction of room temperature strength than the common austenitic alloys like Type 304. Stainless 310 is often used at cryogenic temperatures, with excellent toughness to -450°F, and low magnetic permeability.

310 Stainless steel Characteristic

1．Oxidation resistance to 2100°F
2．Moderate strength at high temperature
3．Resistance to hot corrosion
4．Low magnetic permeability
5．Strength and toughness at cryogenic temperatures

310 Stainless steel Application

1 . Furnaces
2 . Heat treatment baskets
3 . Jigs
4 . Case hardening boxes
5 . Steam locomotives parts
6 . Burners
7 . Combustion chambers
8 . Heat exchangers and food
processing equipment

310 Stainless steel Chemical Composition

Cr	Ni	C	Si	Mn
24.0-26.0	19.2-22.0	0.25 Max	1.50 Max	2.00 Max
P	S	Mo	Cu	Fe
0.045 Max	.03 Max	0.75 Max	0.50 Max	Balance

310 Stainless steel Mechanical Properties

Temperature, °F	Ultimate Tensile Strength, ksi	.2% Yield Strength, ksi	Elongation Percent
70	80	35	52
1000	67.8	20.8	47
1200	54.1	20.7	43
1400	35.1	19.3	46
1600	19.1	12.2	48

310 Stainless steel Typical Creep-Rupture Properties

Temperature, °F	Minimum Creep 0.0001%/hr, ksi	100,000 Hour Rupture Strength, ksi
12000	14.9	14.4
1400	3.3	4.5
1600	1.1	1.5
1800	0.28	0.66

310 Stainless steel Plate

The thickness we produce is from 0.3mm to 120mm, the width we produce is from 1000mm to 2000mm. of course, we can process it and cut the size as customers request.

310 Stainless steel coil

The thickness we produce is from 0.3mm to 14mm, the width we produce is from 1000mm to 2000mm. ofcourse, We have slitting machine.we can cut coil for you according to customers width request.

310 Stainless steel Pipe & Tube

The wall thickness we produce is between 0.5 mm to 30 mm. The out diameter is between 6.0 mm to 480.0 mm.

310 Stainless steel wire

The size we can produce is 0.9mm to 12.0mm diameter. We can packing each coil with 50kg to 500kg. We can produce other stainless wire according to customer's request if you can offer the chemical composition

Chemcial Composition of Grade 310/310S

The chemical composition of grade 310 and grade 310s stainless steel are summarised in the following table.
Table 1. Chemical composition % of grade 310 and 310S stainless steel

Chemical Composition	310	310S
Carbon	0.25 max	0.08 max
Manganese	2.00 max	2.00 max
Silicon	1.50 max	1.50 max
Phosphorus	0.045 max	0.045 max
	0.030 max	0.030 max
Chromium	24.00 - 26.00	24.00 - 26.00
Nickel	19.00 - 22.00	19.00 - 22.00

Mechanical Properties of Grade 310/310S

The mechanical properties of grade 310 and grade 310s stainless steel are summarised in the following table.
Table 2. Mechanical properties of of grade 310/310S stainless steel

Mechanical Properties	310/ 310S
Grade 0.2 % Proof Stress MPa (min)	205
Tensile Strength MPa (min)	520
Elongation % (min)	40
Hardness (HV) (max)	225

Physical Properties of Ferritic Stainless Steel

The physical properties of grade 310 and grade 310s stainless steel are summarised in the following table.
Table 3. Physical properties of grade 310/310S stainless steel

Properties	at	Value	Unit
Density		8,000	Kg/m3
Electrical Conductivity		1.25	%IACS
Electrical Resistivity		0.78	Micro ohm.m
Modulus of Elasticity		200	GPa
Shear Modulus		77	GPa
Poisson's Ratio		0.3
Melting Range		1400-1450	°C
Specific Heat		500	J/kg.°C
Relative Magnetic Permeability		1.02
Thermal Conductivity		14.2	W/m.°C
Coefficient of Expansion	0	15.9	/°C
	0	16.2	/°C
	0	17	/°C

Bebon's stainless products are not only steel plate and sheet, but also many profile steel, like round bar, stainless steel wire, pipes and so on.

In May of 2012, we exported about 100 tons stainless steel wire to Malaysia. Our custoer is KENCANA HL SDN BHD. We have offered top quality and service to them, and we received repeat order from them when they do new project this year.

310 Stainless steel package

BEBON is specialized stainless steel tube,stainless steel bar,stainless steel sheet,stainless steel plates,stainless steel Strip. Based on the domestic rich product resources and professional research on international market, BEBON'service has already spread many countries in Europe , America, Southeast Asia, Middle East, South America, Africa, and so on .

: 0086-371-86151827
: 0086-371-86011881
: [email protected]
: [email protected]
: bebonchina