ASTM A240 S20153 Stainless steel
ASTM A240 S20153 Stainless steel is a cheaper alternative to the traditional Cr-Ni austenitic stainless steels such as 304 stainless steel. ASTM A240 S20153 Stainless steel has good resistance to oxidation, easy fabrication, and excellent toughness even in low temperatures. ASTM A240 S20153 Stainless steel high elongation allows bending and forming. It is not expensive as lower cost nitrogen and manganese are added as partial alternative for nickel. The yield and tensile strengths of ASTM A240 S20153 Stainless steel increases when temperature is decreased. ASTM A240 S20153 Stainless steel is non-magnetic, and is available in sheet and plate forms.
S20153 stainless steelchemical composition is :
| C ≤ |
Mn |
P≤ |
S≤ |
Si≤ |
Cr |
Ni |
Mo |
N≤ |
Cu |
others |
|
0.03 |
6.4-7.5 |
0.045 |
0.015 |
0.75 |
16.0-17.5 |
4.0-5.0 |
- |
0.10-0.25 |
1.00 |
- |
BEBON STEEL has large quantities of spot resources, we have 100,000 tons spot resources distributed respectively in Shanghai, tianjin port.
The production process of ASTM A240 S20153 Stainless steel we offered are: Hot rolled, cold rolled, annealing, pickling, cutting edge and so on.
ASTM A240 S20153 Stainless steel production process Quenching: After heating and preserving heat, cool ASTM A240 S20153 Stainless steel fast in water, oil or other inorganic salts, organic aqueous solution quench medium. Quenched steel hardening, but brittle.
Source:
Tags: stainless steel, S20153 steel, BEBON STEEL
