S460ML TStE460TM E460FP FeE460 KGTM 55EE A572 Gr. 65
| S460ML EN 10113-3 Number:1.8838 | Comparision of steel grades | |
| SEW 083 | TStE 460 TM | |
| NFA 36-201 | E 460 FP | |
| UNI 7382 | Fe E 460 KGTM | |
| BS 4360 | 55 EE | |
| ASTM | A 572 Gr.65 | |
Chemical Composition
| Grade | C max | Si max | Mn max | P max | S max | N max | AL max | Nb max | V max | Ti max | Cr max | Ni max | Mo max | Cu max | CEV max |
| S460ML | 0.16% | 0.60% | 1.70% | 0.025% | 0.02% | 0.025% | 0.02% | 0.05% | 0.12% | 0.05% | 0.30% | 0.80% | 0.20% | 0.55% | 0.48% |
Mechnical Properties
| Temperature | -50 | -40 | -30 | -20 | -10 | 0 | 20 |
| Notch impact test. Min. absorbed energy | 27 | 31 | 40 | 47 | 51 | 55 | 63 |
| Nominal thickness(mm) | to 16 | 16-40 | 40-63 | 63-80 | 80-100 | 100-120 |
| ReH-Minimun yield strength(Mpa) | 460 | 440 | 430 | 410 | 400 | 385 |
| Nominal thickness(mm) | to 40 | 40-63 | 63-80 | 80-100 | 100-120 |
| Rm-Tensile strength(Mpa) | 540-720 | 530-710 | 510-690 | 500-680 | 490-660 |
| Nominal thickness(mm) | - | ||||
| A-Minimum elongation Lo=5,65√So(%) | 17 | ||||
Source:
Tags:
