24 Hour Emergency Steel Machining Response

Chemical composition and application of 20 # steel plate

20 # steel plate is a high-quality carbon structural steel plate, with a thickness range of 3-200mm. The standard GB/T711 is implemented. The delivery status is hot rolling, normalizing, tempering, normalizing and tempering, annealing.

Chemical composition of 20 # steel plate, mass fraction % (melting analysis)
Thickness 3-60mm
C: 0.17-0.23, Si: 0.17-0.37, Mn: 0.35-0.65, P: 0.035, S: 0.035, Cr: 0.2, Ni: 0.3, Cu: 0.25

Thickness >60- 200mm
C: 0.17-0.24, Si: 0.17-0.37, Mn: 0.35-0.65, P: 0.025, S: 0.02, Cr: 0.25, Ni: 0.25, Cu: 0.25

Remarks: 1. The content of residual elements Cr, Ni and Cu in 20 # steel may not be analyzed if the supplier can guarantee it.

2.The allowable deviation of chemical composition of finished steel plate shall comply with the provisions of GB/T222.

Use of 20 # steel plate
The 20 # steel plate is used for parts that do not bear great pressure but require high toughness, such as pull rods, shaft sleeves, screws, lifting hooks, etc., and for pipes, conduits, carburized and cyanated parts with low core strength, such as shaft sleeves, rollers, shafts, gears, sprockets, etc., which are used in non-corrosive media with high pressure and below 450℃.

Are you also interested in further steel processing (machining)?

Just like you, 70% customers choose long-term cooperation with BBN steel not only for our good product and service quality, good reputation in the international market, but also for our experienced one-stop raw material supply and further steel processing!

Fabrication and Machining Service24h Technical support

Contact Us

Henan BEBON Iron&Steel co.,ltd.

Send Order Request