EN10088-1 X2CrNiMoN25-7-4(material no 1.4410) Stainless steel
EN10088-1 X2CrNiMoN25-7-4(material no 1.4410)Stainless steel is a kind of Austenitic-Ferritic Stainless Steel material. X2CRNIMON25-7-4(MATERIAL NO 1.4410)stainless steelchemical composition is :
| C ≤ |
Si ≤ |
Mn≤ |
P≤ |
S≤ |
N≤ |
Cr |
Mo≤ |
Cu≤ |
Ni |
Nb |
|
0.030 |
1.0 |
2.00 |
0.035 |
0.015 |
0.24-0.35 |
24.0-26.0 |
3.0-4.5 |
|
6.0-8.0 |
|
X2CRNIMON25-7-4 stainless steel specification:
Round bar steel: Diameter: 1mm-1800mm
Square bar: 50mm*50mm-600mm*600mm
Plate steel/flat bar: Thickness: 0.1mm-80mm Width: 10mm to 1500mm
Tube/pipe:OD:6.0-480.0 mm, WT:0.5 -30 mm
Cold-rolled sheet: 0.3-3.0 mm Width: 1000 -2000 mm
Hot-rolled sheet: 6-120 mm width: 1500-3000 mm
Hot rolled stainless steel sheet (Coil) Thickness: 2.5-20mm width: 1000-3000 mm
Length: We can supply any length based on the customer's requirement
As a professional steel supplier, BEBON STEEL registers hundreds of thousands of tons of X2CRNIMON25-7-4 stainless steel source on our spot trade flatform. If you are interested in X2CRNIMON25-7-4 stainless steel, welcome to contact BEBON STEEL, look forward to cooperate with you.
Source:
Tags: X2CrNiN18-10, 201, 202
