Apr-03-2025
410 stainless steel under ASTM A240 standard is martensitic stainless steel, specifically designed for corrosion-resistant plates, sheets, and strips. Its chemical composition requires a chromium content of 11.5% -13.5%, a carbon content of ≤0.15%,
Apr-03-2025
AISI 410 stainless steel (UNS S41000) is a martensitic stainless steel characterized by high strength and moderate corrosion resistance. Its chemical composition contains 11.5% -13.5% chromium and low carbon (≤0.15%), supplemented with a small amou
Apr-01-2025
‌410 stainless steel sheet is a martensitic stainless steel, containing 11.5%-13.5% chromium and low carbon content. It achieves high hardness (HRC 40-45) and wear resistance through quenching + tempering, and is widely used in tools, valves and
Apr-01-2025
‌AISI 410 stainless steel has a lower chromium content (11.5%-13.5%) and is less corrosion resistant than austenitic stainless steel, so protective measures are needed to delay rusting. Surface passivation treatment (such as immersion in nitric a
Mar-27-2025
The mechanical properties of 410 alloy martensitic stainless steel plate are significantly dependent on the heat treatment process. After quenching and tempering, its hardness can reach HRC 40-45, tensile strength can reach 850-1100 MPa, and yield strengt
Mar-27-2025
410 grade stainless steel is a typical representative of martensitic stainless steel, containing 11.5% -13.5% chromium and 0.08% -0.15% carbon, with moderate corrosion resistance and high mechanical strength. Through the heat treatment process of quenchin
Mar-27-2025
The main difference between 410 and 410S stainless steel lies in their chemical composition and physical properties. 410 stainless steel has a high carbon content (0.08%-0.15%), and after heat treatment, its hardness and strength are better, but its britt
Mar-21-2025
AISI 304L (UNS S30403) is a low-carbon austenitic stainless steel with strong corrosion resistance and excellent weldability. AISI type 304L stainless steel sheet‌ is widely used in food processing, chemical equipment, and storage tanks to avoid
Mar-21-2025
304L stainless steel plate (UNS S30403) has low carbon content and excellent resistance to intergranular corrosion after welding. It is widely used in food processing equipment, chemical storage tanks, and pipelines, meeting hygiene and acid and alkali re
Mar-20-2025
AISI 431 (UNS S43100) martensitic stainless steel plate has high hardness and requires laser or waterjet cutting to avoid thermal deformation and cracking. Accurate control of parameters can reduce residual stress and ensure the dimensional stability of f
Mar-20-2025
Grade 431 stainless steel sheet (UNS S43100) has become the preferred material for key components such as automotive transmission shafts, mechanical gears, and marine pumps and valves due to its high strength, corrosion resistance, and wear resistance. Af
Mar-20-2025
Alloy 431 (UNS S43100) is a martensitic stainless steel known for its high strength, corrosion resistance, and wear resistance, and is widely used in the automotive, mechanical, and marine engineering fields. It enhances corrosion resistance and strength
Mar-14-2025
AISI 431 (UNS S43100) perforated plate is composed of 15% -17% chromium (Cr) and 1.25% -2.5% nickel (Ni) as the core components, with a carbon content strictly limited to ≤ 0.20%. Through quenching and tempering processes, it can achieve a tensile
Mar-14-2025
Grade 431 stainless steel (UNS S43100) is a martensitic alloy containing 15% -17% chromium (Cr) and 1.25% -2.5% nickel (Ni). The carbon content is strictly limited to ≤0.20%. Through quenching and tempering processes, it can achieve a hardness of 5
Mar-11-2025
AISI 431 (S43100) stainless steel sheet coil significantly improves its comprehensive performance through optimized hot rolling process, with yield strength and tensile strength reaching over 650MPa and 850MPa respectively, and elongation rate increased t
Latest Products
Henan BEBON Iron&Steel co.,ltd.