Mar-20-2025
AISI 431 (UNS S43100) martensitic stainless steel plate has high hardness and requires laser or waterjet cutting to avoid thermal deformation and cracking. Accurate control of parameters can reduce residual stress and ensure the dimensional stability of f
Mar-20-2025
Grade 431 stainless steel sheet (UNS S43100) has become the preferred material for key components such as automotive transmission shafts, mechanical gears, and marine pumps and valves due to its high strength, corrosion resistance, and wear resistance. Af
Mar-20-2025
Alloy 431 (UNS S43100) is a martensitic stainless steel known for its high strength, corrosion resistance, and wear resistance, and is widely used in the automotive, mechanical, and marine engineering fields. It enhances corrosion resistance and strength
Mar-14-2025
AISI 431 (UNS S43100) perforated plate is composed of 15% -17% chromium (Cr) and 1.25% -2.5% nickel (Ni) as the core components, with a carbon content strictly limited to ≤ 0.20%. Through quenching and tempering processes, it can achieve a tensile
Mar-14-2025
Grade 431 stainless steel (UNS S43100) is a martensitic alloy containing 15% -17% chromium (Cr) and 1.25% -2.5% nickel (Ni). The carbon content is strictly limited to ≤0.20%. Through quenching and tempering processes, it can achieve a hardness of 5
Mar-11-2025
AISI 431 (S43100) stainless steel sheet coil significantly improves its comprehensive performance through optimized hot rolling process, with yield strength and tensile strength reaching over 650MPa and 850MPa respectively, and elongation rate increased t
Mar-11-2025
After quenching and tempering processes, the hardness of hardened (H) 431 stainless steel (AISI 431/S43100) can be increased to 58-60HRC, with a tensile strength of over 1080MPa, while maintaining a 10% elongation and 39J impact toughness. Its carbon cont
Mar-11-2025
AISI 431 (1.4057/S43100) is a martensitic stainless steel known for its high strength, wear resistance, and moderate corrosion resistance. Its composition includes 15% -17% chromium (Cr) and 1.25% -2.5% nickel (Ni). Through heat treatment, the balance bet
Mar-07-2025
Corrosion resistant stainless steel plates 347 and 347H are produced according to ASTM A240 standard. Among them, 347 contains niobium element, which can effectively resist intergranular corrosion and maintain good mechanical properties in high temperatur
Mar-07-2025
347H (UNS S34709) is a high carbon niobium stabilized austenitic stainless steel designed specifically for high-temperature applications. Its niobium element not only enhances its resistance to intergranular corrosion, but also improves its stability in h
Mar-07-2025
AISI 347 grade stainless steel (UNS S34700, DIN 1.4550) is a niobium stabilized austenitic stainless steel with excellent corrosion resistance and high temperature performance.AISI 347 stainless steel is supplied in the form of strip, coil, and sheet, and
Mar-07-2025
Austenitic stainless steel 347 and 347H are high-performance materials stabilized by niobium, with excellent corrosion resistance and high temperature strength. The addition of niobium effectively prevents the precipitation of chromium carbide and signifi
Mar-07-2025
Alloy 321 premium stainless steel (UNS S32100) is a material with excellent performance. It is based on chromium and nickel, with the addition of titanium element. The addition of titanium effectively improves its resistance to intergranular corrosion, pr
Mar-03-2025
321 stainless steel alloy performs better than 304/304L in high temperature environments due to the addition of titanium element, which effectively prevents the precipitation of chromium carbide and significantly improves its resistance to intergranular c
Mar-03-2025
Stainless steel plates 321 and 321H are titanium stabilized austenitic heat-resistant alloys that comply with ASTM A240 standards and have excellent high temperature and corrosion resistance. 321H is the high carbon version of 321, suitable for higher tem
Latest Products
Henan BEBON Iron&Steel co.,ltd.
Language
Online Consultation
