This customer is one of the world most famous car brand steel pipe supplier.Their final usage is producing the tow bar, tube for chassis, etc.
At first stage,they bought 40 tons pipe for test in their Thailand factory,assemble for 60 sets final products.
Their special technical requirement:
Weld seam width:Above 3mm
We meet all of their technical requirement.
The testing process lasted 3 years.This customer is very serious about the quality,before they place the trial order,they investigate our factory through a third party,they send two technician to witness the producing,and inspect our products by themselves. They also have online meeting with us for many times.
After testing,they are very satisfied with our products quality and gradually increase purchase quantities.
Now,they have totally trust our quality.
By now they place repeat orders for over 600 tons per year. At present we become all-weather strategic partners.
3.Our Warehouse and Workshop:
6.Professional Testing Equipment:
7.BBN QC team Inspection:
QC test result:
All the test results comply with the requirement of standard.
All the results meet client’s requirement, the final results of check are acceptable.
9.EN10204 3.1 MTC:
10.Original Bill of Lading:
11.The Automobile Steel Pipe BBN Can Provide:
1)CCB pipe fittings
CCB is mainly used to support man-machine interface control equipment and decorative parts, and at the same time, it forms a safety system together with other safety structures. Its structure is simple and mainly includes pipe beams, side end brackets, pipe column fixing bracket assemblies, lower legs and auxiliary brackets.
The trunk hinge is the connecting mechanism of the trunk door of the car. Due to the problem of the opening angle of the trunk door, the hinge needs to bear the weight of the trunk door, so the hinge also needs to play a supporting role.
4)Hydro forming pipe
Hydro forming pipe is a process in which a thin-walled metal tube is first pressed through a die, and then the workpiece is deformed from the inside to the outside to the desired geometric shape through a high-pressure liquid medium from both ends. Depending on the shape of the workpiece, pre-bending of the raw material tube may or may not be required before bulging.
5)Car door anti-collision tube
When the side door is hit, the sturdy high-strength anti-collision bar can greatly reduce the deformation of the side door, thereby reducing the damage to the occupants caused by the collision of the car.
7)Assembly for automobile
12.The Steel Pipe BBN Can Produce:
We have 4 typical production lines,which can produce hot rolled Seamless, LSAW, ERW and SSAW pipes.
(1) The Seamless pipe supplied scope is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.
(2) LSAW pipes production line range is OD 406mm--4500mm, wall thickness 6mm--100mm, Annual capacity is 150 thousand tons .
(3) ERW pipes production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.
(4) SSAW pipes production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.
Just like you, 70% customers choose long-term cooperation with BBN steel not only for our good product and service quality, good reputation in the international market, but also for our experienced one-stop raw material supply and further steel processing!