Feb-25-2022
A537 steel series are heat-treated carbon-manganese-silicon steel sheets for American standard pressure vessels, which are divided into three grades, namely A537 CL1, A537 CL2, and A537CL3 . The maximum thickness of A537 CL1 plate is 100mm, and the maximu
Feb-23-2022
Carbon structural steel belongs to the mass-produced steel category, and its output accounts for about 70% of the total output of steel. Most of carbon structural steels are used for engineering structural materials, generally used in hot-rolled state; a
Feb-23-2022
Q345B steel is a grade B low carbon alloy steel. Its main features are good comprehensive performance, good low temperature performance, cold stamping performance, good welding performance and machinability. And the yield value of Q345B steel decreases as
Feb-21-2022
S460N European standard plate has high strength, especially in the state of normalizing or normalizing and tempering, and has high comprehensive mechanical properties. High strength plate S460N is mainly used for large ships, bridges, power station equipm
Feb-18-2022
SS400 plate belongs to the Japanese standard carbon structural steel plate, and the implementation standard of SS400 steel plate is JIS G3101.SS400 steel plate itself not only has high strength, but also has certain toughness, fatigue resistance, impact r
Feb-17-2022
A709-50F-2 steel plate and A709-50T-2 steel plate thickness range: 8-100mmA709-50F-2 and A709-50T-2 steel plate impact test and service temperature range: Grade Thickness, mm min test value,J min average value, J Area 1 Area 2 Area 3
Feb-17-2022
A709-50F-2 and A709-50T-2 steel are both American standard bridge structural steels, which are used to make highway bridges and railway bridges (including sea-crossing bridges) of riveted and bolted structures.A709 refers to the American standard: ASTM A7
Feb-14-2022
20MnMoNi55 and 20MnMoR steel plates are for boilers and pressure vessels. The delivery status of 20MnMoNi55 steel plate: normalizing + tempering, quenching and tempering (Q+T), mainly used for the production of methanol synthesis tower. The delivery statu
Feb-10-2022
A514 Gr.F steel plate and A514 Gr.E steel plates are high-strength weldable steel plates that have been quenched and tempered under ASTM standards.
Feb-09-2022
A514 Gr.Q steel plate is rack steel for construction machinery and jack-up offshore drilling platforms. A514 Gr.Q steel plate belongs to American standard alloy structural steel plate. The hardness of A514 Gr.Q steel plate is between 235-293 and the yield
Feb-08-2022
A514 Gr.Q and A514 Gr Q modified steel are both rack steels, A514 Gr Q modified steel plate is an upgraded version of A514 Gr.Q steel plate. A514GrQ modified steel plate is a rack steel for jack-up offshore drilling platforms. It is used to manufacture le
Feb-08-2022
A514 GrQ modified steel plate is rack steel, used to manufacture jack-up offshore drilling platform legs. Racks for offshore platforms generally use A514 GrQ modified. Its yield is greater than 630MPa, the tensile strength is above 700MPa, and the physica
Jan-27-2022
SM400ZL steel plate is Japanese standard steel for the converter shell. The negative deviation of SM400ZL steel plate thickness is limited to -0.25mm.Melting analysis of chemical composition of SM400ZL steel plate: Grade C Si Mn P S A1t
Jan-26-2022
SA543 Type B CL2 steel plate is a quenched and tempered Ni-Cr-Mo alloy steel plate for pressure vessels, mainly used to manufacture the largest reactor - ethylene oxide reactor in chemical production. The strength of the steel plate is high, and the welde
Jan-25-2022
Mn13 steel plate is austenitic work-hardening steel, which has a high level of wear resistance after being subjected to vibration or strong material impact. When used under impact load wear conditions, it has surface austenite structure deformation induce
Latest Products
Henan BEBON Iron&Steel co.,ltd.
Language
Online Consultation
