EN10088-1 X1CrNiMoN25-22-2(material no 1.4466)Stainless steel
EN10088-1 X1CrNiMoN25-22-2(material no 1.4466) Stainless steel is a kind of Austenitic Stainless Steel material.
X1CRNIMON25-22-2 stainless steel chemical composition:
|
C(％) |
Si(％) |
Mn(％) |
P(％) |
S(％) |
Cr(％) |
Ni(％) |
Mo(％) |
N(%) |
|
Max 0.020 |
Max 0.70 |
Max 2.00 |
Max 0.025 |
Max 0.010 |
24.00-26.00 |
21.00-23.00 |
2.00-2.50 |
0.10-0.16 |
X1CRNIMON25-22-2 stainless steel mechanical property:
|
Annealing hardness |
Cold pull hardness |
Preheating temperature |
Quenching temperature |
Holding time |
Hardening medium |
Temper temperature |
After tempering hardness |
|
|
salt-bath furnace |
controlled atmosphere furnace |
|||||||
|
235 |
262 |
788 |
1191 |
1204 |
5～15 |
air cooling |
522 |
60 |
|
Steel plate/Sheet |
σb |
σs |
δ |
180 ° of cold bending test |
|
|
longitudinal |
horizontal |
||||
|
Hot-rolled/Cold rolling:5 - 150 |
520 |
415 |
16～18 |
2a |
3.5a |
X1CRNIMON25-22-2 stainless steel specification:
Round bar: Diameter : 1mm-2000mm
Square bar: 50mm * 50mm-600mm *600mm
Plate steel/flat bar: Thickness: 0.1mm-800mm Width: 10mm to 1500mm
Tube/pipe: OD: 6-219mm WT: 1-35 mm.
Cold-rolled sheet: Thickness: 2-5mm Width:1000mm Length: 2000mm
Hot-rolled sheet: Thickness:6-80mm Width: 210-610mm
Length: We can supply any length based on the customer's requirement.
BEBON STEEL is X1CRNIMON25-22-2 stainless steel supplier. We can produce X1CRNIMON25-22-2 stainless steel for the clients according to their special requirement. If you are interested in X1CRNIMON25-22-2 stainless steel, please browse the web pages or contact BEBON STEEL.
Source:
Tags: X1CrNiSi18-15-4, X1NICRMOCU25-20-5, 201
