x65 pipe is primarily used in the oil and gas industries as one of the primary steels used in pipe. The strength and low cost make x65 pipe much more attractive than other, higher-performing steels since these industries routinely use miles of pipe. The strength of x65 pipe also means it is a good choice for pressurized lines, where the steel's excellent weldabilty ensures strong seals.
x65 pipe
x65 pipe chemistry
In terms of chemistry, x65 pipe is quite simple when compared to other specialized steels. x65 pipe has a very low carbon content (0.10 percent) compared against other steels. Additional elements are also found in smaller quantities; silicon (0.35 percent), sulfur (0.005 percent), phosphorous (0.15 percent), and nitrogen at 0.015 percent. Manganese is the most abundant element --- after iron --- at 1.5 percent. Additionally, x65 pipe has two exotic elements added as needed for specific applications. Vanadium and titanium both add toughness and are sometimes found in small quantities.
x65 pipe physical properties
In terms of physical properties, x65 pipe's most useful property for the pipe-fitting applications is its excellent weldability. x65 pipe is quite tough, with a yield strength (the point at which the steel deforms under pressure) of 65 kilograms per square inch. The tensile strength (the point at which the material necks, or deforms radially) is 77 ksi. Other properties include a slight ability to be heat treated, but due to the low carbon content X65 cannot be tempered.
As a professional steel supplier, BEBON STEEL registers Hundreds of thousands of tons of x65 pipe ex-stock source on our spot trade flatform.
If you are interested in x65 pipe, welcome to contact us, look forward to cooperate with you.
Source:
Tags:
