S460N and S460NL normalized structural steel plate

With minimum yield strength 460Mpa,S460N and S460NL can work in the normal strength situiations when construction.

Besides the impacting test and Normalized heat treatment,customers usually indicate the following technical terms in their P/O:

I. PWHT (Simulated post-weld heat treatment), instruct temperature and time when rolling.

II. Ultrasonic examination or named UT.

III. DWTT for steel plate straight test.

IV. The third party inspection.

The mill definately Henan BEBON international co.,ltd would issue all the above tests result on our MTC paper for customers' checking when finished rolling.We give the chemical elements contains sheet as belows:

Steel Grade

Chemical Composition Max Heat Analysis

Grade	C max	Si max	Mn	P max	S max.	Cu max	Cr max	Ni max	V max	Nb max	Al min
S460N	0.2	0.6	1.00-1.70	0.03	0.025	0.55	0.3	0.5	0.12	0.05	0.02
S460NL	0.2	0.6	1.00-1.70	0.25	0.02	0.55	0.3	0.8	0.2	0.1	0

thickness	Yield StrengthReH[N/mm2] transv.min.		TensileStrengthRm[N/mm2]transv.		Fracture Elongation[%]transv. min.		Notch Impact Energy1)Ch Vcomplete samplelongitud. min [J]
	S460N	S460NL	S460N	S460NL	S460N	S460NL	S460N	S460NL
t≤ 16mm t >16mm	460 440		-		-		+20 KV 31J 0 KV 27J -10 KV 24J -20 KV 20J -30 - -40 - -50 -	+20 KV 40J 0 KV 34J -10 KV 30J -20 KV 27J -30 KV 23J -40 KV 20J -50 KV 16J
t < 3mm t ≥ 3mm	-		540-720		-
Up to 1.5mm 1.51-2.00mm 2.01-2.50mm 2.51-2.99mm ≥ 3mm	-		-		17

Source:

Tags: S460N, S460NL, S460N, S460NL steel plate/sheet, S460N S460NL steel plate/sheet is the normalized structural steel plate.