ASTM A516Gr65/ASME SA516Gr65 is an excellent weldable carbon steel choice for pressure vessels and boiler fabrication. The material offers excellent performance in lower than ambient temperature service, has good weldability and excellent notch toughness.
ASYM A516 Grade 65/ASME SA516 Grade65A has greater specified tensile and yield strength when compared with ASTM A516 Gr60/ASME SA516Gr60.
Used throughout the oil, gas and petrochemical industry, the steel is also found in sour service and wet H2S applications (where the steel is HIC tested).
Henan BEBON international co.,ltd stock s ASTM A516 Grade 65 /ASME SA516 Grade65 carbon steel plates which come with mill certification in compliance with EN10204 3.1 or EN10204 3.2. The plates are hard stamped and are fully traceable.
Chemical Composition of ASTM A516 Grade 65 /ASME SA516 Grade65
|
Carbon(C)
|
%
|
Manganese(Mn)
|
%
|
Phosphorus(P)
|
%
|
|
12.55mm or less
12.5-50mm
50-100mm
100-200mm
>200mm
|
0.24
0.26
0.28
0.29
0.29
|
12.5mm or less
Heat Analysis
Product Analysis
Over 12.5mm
Heat Analysis
Product Analysis
|
0.85-1.20
0.79-1.30
0.85-1.20
0.79-1.30
|
(max)
|
0.035
|
|
Sulphur(S)
|
%
|
Silicon(Si)
|
%
|
|
|
|
(max)
|
0.035
|
Heat Analysis
Product Analysis
|
0.15-0.40
0.13-0.45
|
||
Mechanical Properties of ASTM A516Gr65/ASTM SA516Gr65
|
Description
|
Grade65
|
|
Tensile Strength(Ksi)
Tensile Strength(MPa)
Elongation in 200mm(min.%)
Elongation in 50mm(min.%)
Thickness(max/min)
|
65-85
450-585
35
240
19
21
205
|
Source:
